sales@peakbuildingsystems.com

Isoparete Box is a sandwich cladding panel used for wall use in industrial and commercial buildings, characterized by a concealed fastening system. You can choose the type of exterior finish between two different types of profiles.

Double-steel sheet roof panel, insulated with polyisocyanurate rigid foam for roof with a minimum slope of 7%. External steel sheet profiled with 4 ribs, to increase static and dynamic resistance. Panels are fastened using visible through-fastened screw and saddle clip at each high rib along the supports.

Isofire Wall is a sandwich panel used for walls of industrial facilities. It has a tongue and groove joint and visible fixing. The rock wool insulation makes it fire resistant.

It is a double-steel sheet wall panel, insulated with polyisocyanurate rigid foam. The tongue-and-groove joint is visible using through-fastened screw and saddle washer. External face available in plissé, box and piano profiles. internal face available in box profile. It is also suitable for cooling chambers.

Isopiano polyurethane wall panel, with smooth finishing and visible fixing. It can be installed vertically or horizontally.

LEAF technology improves the thermal performance of the insulating material, by lowering the thermal conductivity of polyurethane foam.
LEAF technology provides therefore lower thermal transmittance values compared to standard products.
This improvement leads to lower heat loss (up to 20%) on the building envelope. Comes in ALL profiles